Manual chuck TOROK

The TOROK manual chuck is primarily used in tool prototyping on machines without a clamping cylinder. For example, thanks to its easy manual actuation, when used on grinding machines you can safely and delicately clamp. In combination with our clamping device adaptations, such as the MANDO Adapt mandrel-in-chuck or the jaw module, many more clamping options are possible.

And most recent: Thanks to the optional lightweight CFRP design, with the TOROK CFK you save one-third the weight. This is particularly set-up friendly and it offloads the machine spindle bearings.

Key advantages

  • A„lso available in a CFRP lightweight design
  • „Manual actuation – a clamping cylinder is not required
  • „Sensitive clamping possible
  • „Workpiece stabilization through axial draw force applied against the workpiece end-stop
  • „Mandrels, jaw modules, face drivers, and morse taper adaptable

In detail

TOROK CFK SE

  1. Manual actuation via socket wrench
  2. Chuck body made of carbon fiber
  3. Clamping head with pull-back and hexagon geometry for optimum chuck sealing and improved clamping force
  4. Mounting threads for front end-stop
  5. Grease nipple, optimal holding power due to efficient lubrication
  6. Fixed base end-stop for clamping with pull-back effect, central mounting thread for workpiece specific end-stop
  7. Clamping screw for base end-stop, easy mounting through external actuation

TOROK CFK RD

  1. Manual actuation via socket wrench
  2. Chuck body made of carbon fiber
  3. Vulcanized clamping head with hardened steel segments and pull-back
  4. Mounting threads for front end-stop
  5. Fixed base end-stop for clamping with pull-back effect, central mounting thread for workpiece specific end-stop
  6. Clamping screw for base end-stop, easy mounting through external actuation

TOROK SE Typ 1

  1. Manual actuation via socket wrench
  2. Clamping head with pull-back and hexagon geometry for optimum chuck sealing and improved clamping force
  3. Mounting threads for front end-stop
  4. Clamping screw for base end-stop, easy mounting through external actuation
  5. Fixed base end-stop for clamping with pull-back effect, central mounting thread for workpiece specific end-stop
  6. Grease nipple, optimal holding power due to efficient lubrication

TOROK RD Typ 2

  1. Manual actuation via socket wrench
  2. Vulcanized clamping head with hardened steel segments and pullback
  3. Mounting threads for front end-stop
  4. Fixed base end-stop for clamping with pull-back effect, central mounting thread for workpiece specific end-stop
  5. Clamping screw for base end-stop, easy mounting through external actuation
Download . Technical Data
Clamping elements & adaptations

 

Accessories