|
23.02.2010: World innovation: electromechanical actuator A planetary threaded drive, a superimposed gear unit and a servomotor – with this trio HAINBUCH, the Marbach-based clamping device manufacturer, wants to revolutionize machine tools. 23.02.2010: World innovation:The new lightweight construction series Higher productivity, lower energy consumption and offloading of the machine-drive – these are the highlights of the new carbon, ultra-light clamping devices... 23.09.2009 World innovation from HAINBUCH: QUADROK 5-axis clamping vice In the future, users can save themselves the bother of complex and expensive customized solutions. With the double-concentric QUADROK clamping vice, HAINBUCH, the Marbach-based clamping device manufacturer, now brings a clamping system for machining centers on the market... 23.09.2009 vario part and vario quick: The new, variable end-stop systems from HAINBUCH Two systems, even greater flexibility. With the standardized work piece end-stops, valuable time can be saved in work preparation, set-up times are drastically reduced, and the user always has the suitable end-stop on hand...
23.09.2009 Clamping cylinders complete the system With energy-efficient clamping cylinders the company is now positioning itself as a complete provider that covers the entire »clamping device chain«. Normal-pressure, high-pressure, and bearingless high-pressure clamping cylinders are now in the product offering... 06.11.2009 HAINBUCH Christens Mequon Manufacturing Facility HAINBUCH America, an innovator in workholding solutions, has moved last week into its new North American headquarters in Mequon, Wisconsin. 18.08.2009: The standard segmented mandrels now wiht air supply control 100% compatible, stable in price, and even greater process reliability ... 27.04.2009: capteX With capteX machine interface, HAINBUCH is now bringing a quick-change system to the market that neither the centrifugal forces in turning jobs ... 15.10.2008: HYDROK With the HYDROK HAINBUCH is now extending the clever modular system in the stationary segment as well ... 12.02.2008: Hexagon or round In the future, users will ... 17.09.2007: TOPlus IQ chuck from HAINBUCH receives MM Award from trade journal After receiving the Innovation Award from the Small and Mid-Sized Business Initiative for the TOPlus chuck in June, HAINBUCH can now chalk up the next success for the year 2007 ... 17.09.2007: TOPlus IQ In the future a machine operator or programmer will no longer need to rely on feel alone where radial holding forces that have an effect on the work piece are concerned ... 17.09.2007: MANDO T212 The MANDO T212 segmented clamping bushing has been used for some time in customer-specific solutions Now the proven mandrel principle is not only available from stock as part of our standard product line ... 02.08.2007: HYDROK SE HAINBUCH is now extending the clever modular system in the stationary area with the HYDROK. The hydraulically actuated stationary chuck is available in both a hexagon variant and a round variant ... 06.08.2007: TOROK SE In the future users can also use all system units from the modular system in the HAINBUCH TOROK manual chuck ... 06.08.2007: MANOK plus SE HAINBUCH now extends its modular system in the stationary range. With the manual MANOK plus SE stationary chuck a product is introduced ... 13.06.2007: TOPlus chuck from HAINBUCH awarded Innovation Prize The TOPlus mineral-cast chuck has been making headlines ever since it was introduced to the market. The hexagonal chuck is impressive with 25% more holding power, central lubrication, improved dampening characteristics and a clamping head ... 11.06.2007: HAINBUCH commemorates: 10 years of production in Slovakia Good things endure. The HAINBUCH production plant in Trencin in Slovakia is proof. The HS-Tec subsidiary has now been active for ten years and has »developed splendidly«, according to HAINBUCH CEO Gerhard Rall ...
24.05.2007: Flexibility is Trumps Batch manufacturers with production sites in Germany are constantly on the lookout for new rationalization possibilities in order to cope with domestic and international competitive pressure ... 18.05.2007: HAINBUCH puts on the spin Small batch sizes are an everyday fact for HAINBUCH, but clamping ranges up to 420 mm are the exception rather than the rule ... 26.06.2005: TOPlus revolutionary chuck From one mold: TOPlus. Six to win
Machining cast parts can be tricky, because dust, chips and dirt impair the function of the clamping device...
28.06.2005: SPANNTOP nova In full balance – SPANNTOP nova.
There is nothing that cannot be improved upon. That is why the creative team of engineers at HAINBUCH has developed a brand new generation of SPANNTOP chucks. With better...
26.06.2005: MANDO hs dock Extremely well-built – an amazing bundle of energy: MANDO hs dock. The MANDO clamping unit has a new family member: The hs dock is a powerful tool that enables the fast and easy connection of the five MANDO segment mandrels, which were ... 14.06.2004: B-Top3 - New jaw chuck with adaptions Revolutionary: All fit into one
Jaw Chuck – SPANNTOP Chuck – Mandrel. Two great expansions of the building block system SPANNTOP ...
20.11.2006 MANOK plus The new MANOK plus stationary chuck from Hainbuch Workholding Technology is designed to be changed from standard clamping head to mandrel adapter or jaw chuck in less than two minutes... 13.09.2004: MANDO ms dock Flexibility like never before!
The rotating clamping genius MANDO from HAINBUCH Gripping Technology of Marbach, Germany is now also available as a stationary version – expanding the field of applications tremendously...
19.06.2006: CENTREX In standard pallets from HAINBUCH as a mini zero position system, the CENTREX system saves users time, money, and space for part specific equipments... 03.08.2006: ZENTROK Up to now, users were always spoiled for choice: clamping either cubic or round parts securely. The new multiclamp talent from HAINBUCH can now do both: parallel clamping of cubic parts and centric clamping of round work pieces - regardless of the rough dimensions and tolerances... 19.06.2006: MANOK plus Users were already full of enthusiasm for the first version of this manual stationary chuck and not only because of the precision, grip, rigidity, and the optimum accessibility on 5-axis machines. But with MANOK, the cost/efficiency ratio is extremely good...
|
